GSI Audera Pro User Manual
D-0129360 Rev A Page 53 of 231
or on the waveform information panel. The comparison data made be added to
the page for reporting.
• Invert Active Recording – Flips the active recording upside-down.
• Filter – Displays the Filter sub menu. On the sub menu the current filter type is
displayed, and you may select the option to choose a new filter type. Filter types
include smoothing, bandpass and notch filters. The other sub menu items allow
you to filter the active waveform or all waveforms on the page.
o Filter Type
o Active Recording
o All on Page
• Duplicate Active to New Recording – Creates a copy of the selected waveform
to a new recording. The new recording must be saved manually.
• Cross Correlate – Performs a cross correlation calculation for the selected
waveforms. The cursors must be active and used to define the comparison time
start and end. The calculation is displayed in a pop-up dialog.
o Two Selected Recordings
o Within Active Recording
o Active Recording with All on Page
• Split Active Recording – Separates the two internal recording buffers for the
active waveform into two separate waveforms.
Display
• Acquisition Auto-Arrange by – Displays the sort order of the waveforms for the
data acquisition and opens a sub menu where you can choose the order. When
an option is selected the program updates the display as each recording is
completed. To remove the automatic sort order, select None from the sub
menu.
o Intensity
o Acquisition Order
o Stimulation Rate
o None
• Automatically Adjust Size – Sets the vertical spacing between waveforms based
on the number of waveforms acquired on the page. This option is a toggle and is
On by default.
• Arrange by Intensity – Arranges the waveforms on the page by the stimulus
level. The highest level is placed at the top. If you are on a split screen layout or
your data contains both right and left ears, the left and right ear waveforms will
be placed on separate sides.
• Arrange by Intensity (Overlapping Channels) – Arranges the waveforms on
the page by the stimulus level. The highest level is placed at the top. If you are
on a full screen layout, the left and right ear waveforms will be overlapped.
• Arrange by Acquisition Order – Arranges the waveforms on the page by the
time the data was collected. The earliest acquired waveform is placed at the top
To Next Page
