2-4
For details about the port link-type, port hybrid pvid vlan, and port hybrid vlan commands, refer to
VLAN Commands.
Configuring Multicast VLAN Ports
In this approach, you need to configure a VLAN as a multicast VLAN and then assign user ports to this
multicast VLAN by either adding the user ports in the multicast VLAN or specifying the multicast VLAN
on the user ports. These two configuration methods give the same result.
Configuring multicast VLAN ports in multicast VLAN view
Follow these steps to configure multicast VLAN ports in multicast VLAN view:
To do... Use the command... Remarks
Enter system view
system-view
—
Configure the specified VLAN as
a multicast VLAN and enter
multicast VLAN view
multicast-vlan vlan-id
Required
Not a multicast VLAN by
default
Assign ports to the multicast
VLAN
port interface-list
Required
By default, a multicast VLAN
has no ports.
Configuring multicast VLAN ports in interface view or port group view
Follow these steps to configure multicast VLAN ports in interface view or port group view:
To do… Use this command… Remarks
Enter system view
system-view
—
Configure the specified VLAN
as a multicast VLAN and enter
multicast VLAN view
multicast-vlan vlan-id
Required
Not a multicast VLAN by
default.
Return to system view
quit
—
interface interface-type
interface-number
Enter interface view or port
group view
port-group manual
port-group-name
Required
Use either command.
Configure the current port(s) as
port(s) of the multicast VLAN
port multicast-vlan vlan-id
Required
By default, a user port does not
belong to any multicast VLAN.
To Next Page
Loading...
Need help?
General