H3C S5120-SI Series Configuration Guide

1-6
z A new entry cannot be created if its parameters are identical with the corresponding parameters of
an existing entry Refer to Table 1-1
for the parameters to be compared for different entries.
z The system limits the total number of each type of entries (Refer to Table 1-1 for the detailed
numbers). When the total number of an entry reaches the maximum number of entries that can be
created, the creation fails.
Table 1-1 Restrictions on the configuration of RMON
Entry Parameters to be compared
Maximum number of
entries that can be
created
Event
Event description (description string), event type (log,
trap, logtrap or none) and community name
(trap-community or log-trapcommunity)
60
Alarm
Alarm variable (alarm-variable), sampling interval
(sampling-interval), sampling type (absolute or delta),
rising threshold (threshold-value1) and falling threshold
(threshold-value2)
60
Prialarm
Alarm variable formula (alarm-variable), sampling
interval (sampling-interval), sampling type (absolute,
changeratio or delta), rising threshold
(threshold-value1) and falling threshold
(threshold-value2)
50
Displaying and Maintaining RMON
To do… Use the command… Remarks
Display RMON statistics
display rmon statistics
[ interface-type
interface-number ]
Available in any view
Display the RMON history
control entry and history
sampling information
display rmon history
[ interface-type
interface-number ]
Available in any view
Display RMON alarm
configuration information
display rmon alarm
[ entry-number ]
Available in any view
Display RMON prialarm
configuration information
display rmon prialarm
[ entry-number ]
Available in any view
Display RMON events
configuration information
display rmon event
[ entry-number ]
Available in any view
Display log information for the
specified or all event entries.
display rmon eventlog
[ entry-number ]
Available in any view

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English