H3C S5120-SI Series

4-2
To do… Use the command… Remarks
Enter system view
system-view
—
Enter
interface
view
interface interface-type
interface-number
Enter
interface
view or
port group
view
Enter port
group
view
port-group manual port-group-name
Use either command
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port
group.
Configure the line rate
for the interface/port
group
qos lr { inbound | outbound } cir
committed-information-rate
Required
Display line rate
information on the
interface
display qos lr interface
[ interface-type interface-number ]
Available in any view
Line rate configuration example
Limit the outbound line rate of GigabitEthernet 1/0/1 to 1280 kbps.
# Enter system view.
<Sysname> system-view
# Enter interface view.
[Sysname] interface gigabitethernet 1/0/1
# Limit the outbound line rate of GigabitEthernet 1/0/1 to 1280 kbps.
[Sysname-GigabitEthernet1/0/1] qos lr outbound cir 1280