2-9
Restoring the Startup Configuration File
The restore function allows you to copy a configuration file from a TFTP server to the device and specify
the file as the startup configuration file to be used at the next system startup.
Follow the step below to restore the startup configuration file to be used at the next system startup:
To do… Use the command… Remarks
Restore the startup
configuration file to be used at
the next system startup
restore startup-configuration
from src-addr src-filename
Required
Available in user view
z The restore operation restores the main startup configuration file.
z Before restoring a configuration file, you should ensure that the server is reachable, the server is
enabled with TFTP service, and the client has read and write permission.
z After the command is successfully executed, you can use the display startup command (in user
view) to verify that the filename of the configuration file to be used at the next system startup is the
same with that specified by the filename argument.
Displaying and Maintaining Device Configuration
To do… Use the command… Remarks
Display the information about
configuration rollback
display archive configuration
Available in any view
Display the currently running
configuration file saved on the
storage medium of the device
display saved-configuration
[ by-linenum ]
Available in any view
Display the configuration files
for this and the next system
startup
display startup
Available in any view
Display the validated
configuration in current view
display this [ by-linenum ] Available in any view
Display the current
configuration
display current-configuration
[ [ configuration
[ configuration ] | interface
[ interface-type ]
[ interface-number ] ]
[ by-linenum ] [ | { begin |
include | exclude } text ] ]
Available in any view
To Next Page
Loading...
Need help?
General