H3C S5130S-EI series - Page 73

70
Item S5130S-10P-HPWR-EI S5130S-12TP-HPWR-EI S5130S-20P-PWR-EI
SFP port 2
4 (The two lowest-numbered
SFP ports form combo
interfaces with their
corresponding
10/100/1000BASE-T
autosensing Ethernet ports,
respectively.)
4
Input voltage
• Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz
• Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
Maximum PoE
power per port
30 W
30 W
The combo copper ports on
an S5130S-12TP-HPWR-EI
switch do not support PoE
power supply.
30 W
Total PoE power 125 W 125 W 170 W
Minimum power
consumption
13 W 14 W 18 W
Maximum power
consumption
(including PoE
power
consumption)
153 W 156 W 210 W
Chassis leakage
current compliance
UL 60950-1/EN 60950-1/IEC 60950-1/GB 4943/UL 62368-1/EN 62368-1/IEC
62368-1
Melting current of
power module fuse
6.3 A/250 V 6.3 A/250 V 10 A/250 V
Cooling system
Natural cooling without
fan trays
Natural cooling without fan
trays
Using fixed fan trays to
draw ambient air in from
the left side and exhaust
heated air from the right
side.
Operating
temperature
–5°C to +45°C (23°F to 113°F)
Operating humidity 5% to 95%, noncondensing
Fire resistance
compliance
UL 60950-1/EN 60950-1/IEC 60950-1/GB 4943/UL 62368-1/EN 62368-1/IEC
62368-1
Table 17 Technical specifications for PoE switch models (2)
Item S5130S-28ST-PWR-EI S5130S-52ST-PWR-EI
Dimensions (H × W ×
D)
43.6 × 440 × 320 mm (1.72 × 17.32 ×
12.60 in)
43.6 × 440 × 320 mm (1.72 × 17.32 ×
12.60 in)
Weight ≤ 4.5 kg (9.92 lb) ≤ 4.5 kg (9.92 lb)
Console port 1 × serial console port
10/100/1000BASE-T
autosensing Ethernet
port
24 48