H3C S5130S-EI series - Page 74

71
Item S5130S-28ST-PWR-EI S5130S-52ST-PWR-EI
10/5/2.5/1GBASE-T
autosensing Ethernet
port
2
SFP+ port 2
Input voltage
• Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz
• Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
Maximum PoE power
per port
30 W
Total PoE power 370 W
Minimum power
consumption
20 W 32 W
Maximum power
consumption
(including PoE power
consumption)
450 W 470 W
Chassis leakage
current compliance
UL 60950-1/EN 60950-1/IEC 60950-1/GB 4943/UL 62368-1/EN 62368-1/IEC
62368-1
Melting current of
power module fuse
2 A/250 V
Cooling system
Using fixed fan trays to draw ambient air in from the chassis left side and exhaust
heated air from the chassis right side.
Operating
temperature
–5°C to +45°C (23°F to 113°F)
Operating humidity 5% to 95%, noncondensing
Fire resistance
compliance
UL 60950-1/EN 60950-1/IEC 60950-1/GB 4943/UL 62368-1/EN 62368-1/IEC
62368-1
Table 18 Technical specifications for PoE switch models (2)
Item S5130S-28P-PWR-EI S5130S-52P-PWR-EI S5130S-28P-HPWR-EI
Dimensions (H × W
× D)
43.6 × 440 × 260 mm (1.72
× 17.32 ×10.24 in)
43.6 × 440 × 400 mm
(1.72 × 17.32 × 15.75 in)
43.6 × 440 × 260 mm (1.72
× 17.32 ×10.24 in)
Weight ≤ 4 kg (8.82 lb) ≤ 6 kg (13.23 lb) ≤ 4.5 kg (9.92 lb)
Console port 1 × serial console port 1 × serial console port 1 × serial console port
10/100/1000BASE-
T autosensing
Ethernet port
24 48
28 (The four
highest-numbered
10/100/1000BASE-T
autosensing Ethernet
ports form combo
interfaces with their
corresponding SFP ports,
respectively.)
SFP port 4 4
4 (Each and its
corresponding
10/100/1000BASE-T
autosensing Ethernet port
form a combo interface.)