H3C S5130S-EI series - Page 84

81
Model
SFP port support for SFP
transceiver modules and cables
Restrictions
S5130S-28PS-EI
S5130S-28P-HPWR-EI
S5130S-28S-HPWR-EI
GE SFP transceiver modules and
cables in Table 29 and FE SFP
transceiver modules in Table 30
N/A
S5130S-28F-EI
Make sure the ambient temperature
does not exceed 40°C (104°F)
when the following conditions are
met:
• The switch uses one or two
PSR75-12A power modules
for power supply.
• The switch uses transceiver
modules with a maximum
transmission distance greater
than or equal to 80 km (49.71
miles)
S5130S-52F-EI
Make sure the ambient temperature
does not exceed 40°C (104°F)
when the following conditions are
met:
• The switch uses one or two
PSR75-12A power modules
for power supply.
• The switch uses transceiver
modules.
Table 29 GE SFP transceiver modules and cables
GE SFP
transceiver
module/cable
Central
wavelength
Connector
Cable
specifications
Modal
bandwidth
(MHz*km)
Max
transmission
distance
Copper SFP transceiver module
SFP-GE-T N/A RJ-45
Twisted pair
cable
N/A 100 m (328.09 ft)
SFP-GE-T-D N/A RJ-45
Twisted pair
cable
N/A 100 m (328.09 ft)
Fiber SFP transceiver module
SFP-GE-SX-MM8
50-A
850 nm LC
50/125 µm
multi-mode
optical fiber
500 550 m (1804.46 ft)
400 500 m (1640.42 ft)
62.5/125 µm
multi-mode
optical fiber
200 275 m (902.23 ft)
160 220 m (721.78 ft)
SFP-GE-SX-MM8
50-D
850 nm LC
50/125 µm
multi-mode
optical fiber
500 550 m (1804.46 ft)
400 500 m (1640.42 ft)
62.5/125 µm
multi-mode
optical fiber
200 275 m (902.23 ft)
160 220 m (721.78 ft)