29
As a best practice, do not set a MAC address in the VRRP-reserved MAC address range for a
Layer 3 Ethernet subinterface.
Display and maintenance commands for Ethernet
interfaces
Execute display commands in any view and reset commands in user view.
Task Command
Display interface traffic statistics.
display counters
{
inbound
|
outbound
}
interface
[
interface-type
[
interface-number
]
]
Display traffic rate statistics of interfaces
in up state over the last statistics polling
interval.
display counters rate
{
inbound
|
outbound
}
interface
[
interface-type
[
interface-number
]
]
Display the Ethernet module statistics.
display ethernet statistics
slot
slot-number
Display the operational and status
information of the specified interfaces.
display interface
[
interface-type
[
interface-number |
interface-number.subnumber
]
]
[
brief
[
description
|
down
]
]
Display information about link flapping
protection on interfaces.
display link-flap protection
[
interface
interface-type
[
interface-number
]
]
Display information about dropped
packets on the specified interfaces.
display packet-drop
{
interface
[
interface-type
[ interface-number ]
]
|
summary
}
Display PFC information on the specified
interfaces.
display priority-flow-control interface
[
interface-type
[
interface-number
]
]
Display information about storm control
on the specified interfaces.
display storm-constrain
[
broadcast
|
multicast
|
unicast
]
[
interface
interface-type
interface-number
]
Clear interface statistics.
reset counters interface
[
interface-
ype
[
interface-number ]
]
Clear the Ethernet module statistics.
reset ethernet statistics
[
slot
slot-number
]
Clear the statistics of dropped packets
on the specified interfaces.
reset packet-drop interface
[
interface-type
[
interface-number ]
]
Display the status and packet statistics of
interfaces.
display interface link-info
[
main
]
Display the operational and status
information of interfaces except
subinterfaces.
display interface
[
interface-type
]
[
brief
[
description
|
down
]
]
main