16
Task Command
Display detailed DRNI MAD
information.
display drni mad verbose
Display DR role information.
display drni role
Display brief information about the IPP
and DR interfaces.
display drni summary
Display the DR system settings.
display drni system
Display detailed information about the
IPP and DR interfaces.
display drni verbose
[
interface
bridge-aggregation
interface-number
]
Clear DRCPDU statistics.
reset drni drcp statistics
[
interface
interface-list
]
DRNI configuration examples
Example: Configuring basic DRNI functions
Network configuration
As shown in Figure 7, configure DRNI on Device A and Device B to establish a multichassis
aggregate link with Device C.
Figure 7 Network diagram
Procedure
1. Configure Device A:
# Configure DR system settings.
<DeviceA> system-view
[DeviceA] drni system-mac 1-1-1
[DeviceA] drni system-number 1
[DeviceA] drni system-priority 123
# Configure DR keepalive packet parameters.
[DeviceA] drni keepalive ip destination 1.1.1.1 source 1.1.1.2
To Next Page
Loading...
Need help?
General