Error messages/operating state (LED display)
110 A0293_06_E00_03 HBM: public MP85A
The Ethernet status LEDs are located on the underside of the MP85A process
controller.
Ethernet status LED Green LED Yellow LED
Physical connection present - on
Transmit/receive data - flashing
100 MBit transmission speed on -
10 MBit transmission speed - on or flashing
Tip
The relevant device status and error overview are clearly displayed in the “Sta
tus overview” window. Open the window by clicking the “Status” button in the
“Measured value display” window (Fig. 12.1 on page 111).
The meaning of the displays and possible corrective measures for error mes
sages are listed in the online help (open Help with F1). You can find further
helpful tips and information on settings in the FAQs section of the online help.
To Next Page
Loading...
