HBM MP85A - Page 109

Error messages/operating state (LED display)
MP85A A0293_06_E00_03 HBM: public 109
LED
flashes
Green
LED
Yellow
LED
Red
LED
LED 1 (OK/NOK)/Process state
Process has started x x
Overall result OK x
Overall result NOK x
LED 2 (status)
LED 2 (status)/Device status Red
LED
Yellow
LED
Green
LED
LED
flashes
Initialization after device is switched
on
x
One of the following errors is present:
EEPROM error, initial calibration error,
scaling error, MMC/SD error or CAN
bus error
x
Transducer error, ADC overflow or
gross overflow (one or both measure
ment channels)
x x
LCD error x x
CAN bus: Transmit/receive data x x
“Pre-operational” state x
“Operational” state x
MP85ADP PROFIBUS status Red
LED
Yellow
LED
Green
LED
LED
flashes
Error state x
BD_SEAR, WT_PARM, WT_CONF
states
x
DATA_EX status x