July 2010 10 – 107
Horizontal
resolution
Now you can spread the time axis:
8 Switch to the next soft-key row.
8 Use the arrow keys on the keyboard to place the cursor 1 on a horizontal position of the
recording. This position serves as anchor for time spreading.
8 Use the following soft keys:
The signal details can be made visible:
With the following soft keys the recording can be shifted on the time axis:
Display larger detail of the time axis (up to entire image)
Display smaller detail of the time axis
The displayed time detail is shown in a small bar at bottom left.
Every new recording is displayed with this setting.
Shift the display range to the left.
Shift the display range to the right.
To Next Page
Loading...
