HEIDENHAIN ITNC 530 - Proceeding for the Dual-Processor Version

July 2010 14 – 215
14.5 Proceeding for the Dual-Processor Version
8 Press the Windows key to display the taskbar.
8 Open the folder C:\Program Files\Install with, e.g., the Windows explorer.
8 Click the folder with the current NC software version on the machine.
DANGER
You may only activate the NC software currently used by the machine!
A change to another NC software version is not described in this Service Manual and must
only be made in agreement with the machine manufacturer.
Caution
With the dual-processor version of the iTNC 530 as of NC software 34049x-02, NC software
is installed with Windows.
A corresponding Windows authorization is required.
If necessary, ask the machine manufacturer!