July 2010 9 – 89
9 Integrated Diagnostic Functions and DriveDiag
9.1 Introduction
The iTNC 530 features numerous diagnostic functions for finding errors.
These diagnostic functions provide information on:
Operating states and signals;
for this purpose, traffic light symbols (red, yellow, green) are used.
Voltage values
Current values
Temperature values
Electronic ID labels
Motor data
The integrated diagnostic functions can also be used to test the position encoders.
The integrated diagnostic functions were completely revised with the release of NC software
version 34049x-04 and are summarized under the term DriveDiag.
The features were expanded and the operation and display of the editor were changed.
The application of the integrated diagnostic functions before and as of NC software version
34049x-04 is explained in this manual!
To Next Page
Loading...
