11 – 130 HEIDENHAIN Service Manual iTNC 530
Selecting absolute
operands in the
WATCH LIST
8 You have called the WATCH LIST.
8 Now press the INSERT LINE soft key.
8 Press the RIGHT ARROW key until the cursor is in the ADDR column.
8 Enter the absolute address of the operand, e. g. W1022.
8 Press the ENT key.
Figure: Example for the selection of absolute operands
Saving the
WATCH LIST file
After you have created a WATCH LIST file, you can save it in order to be able to call it again at a
later date:
8 Press the PGMMGT key. --> The program management opens and the cursur is placed on the
file TEMP.WLT in the path PLC:\DEBUG.
8 Press the COPY soft key.
8 Enter a target file (e.g., Watch123.wlt).
Calling a
WATCH LIST file
A saved WATCH LIST file can be called again at any time:
8 Open the WATCH LIST function.
8 Press the PGMMGT key. --> The program management is opened.
8 Place the cursor in path PLC:\DEBUG on the saved WATCH LIST file (e.g., Watch123.wlt).
8 Press the ENT key. --> The file is called in the WATCH LIST function.
Create a WATCH LIST, if necessary, with the aid of the machine manufacturer!
You can also call the TABLE or the TRACE IN CODE function before and add to the WATCH
LIST with the ADD TO WATCH LIST soft key.
To Next Page
Loading...
