July 2010 17 – 259
Position of the fuses in the UV 105 B:
Corrective action A defective UV 105 (B) must be replaced.
Mounting the
UV 105 (B)
If any of the fuses is defective, the UV 105 (B) power supply unit must be replaced.
Replacing the fuses is not advised.
For mounting the UV 105 (B), the additional 5V lines must be connected with the correct
polarity!
Otherwise there will be a short circuit of these lines on the 5V ribbon wires.
Restore the ground by means of lines and conductor bars!
To Next Page
Loading...
