July 2010 26 – 435
Switching unit
Machine
operating panel
TE 420 operating panel
Only used for the iTNC 530 single-processor control.
The IV and V keys are snap-ons, and can be switched.
BTS 1x0 screen-keyboard switching unit
With the BTS 1x0, it is possible to connect two monitors and two
operating panels to an MC 42x (B/C).
MB 520 machine operating panel
Machine operating panel with snap-on (switchable) keys.
There is an EMERGENCY STOP button on the machine operating
panel.
MB 420 machine operating panel
Machine operating panel with snap-on (switchable) keys.
There is an EMERGENCY STOP button on the machine operating
panel.
To Next Page
Loading...
