HEIDENHAIN ITNC 530 - Page 576

30 – 576 HEIDENHAIN Service Manual iTNC 530
8 Place the cursor with the arrow key in the next line. --> The modified line is
structured.
Deleting records
and marks
If you want to delete from right to left :
8 Press this key.
If you want to delete from left to right:
8 Press the CE key.
If you have deleted a complete line:
8 Press the END key. --> The machine parameter editor generates the deleted parameter again
and asks you for information.
8 Enter the correct value (if required, look it up in the original MP list).
Caution
Do not press the DEL key if you want to delete individual letters, words, numbers, etc.
Press DEL to delete a complete line!