HEIDENHAIN MANUALPLUS 620 User Manual

148 smart.Turn Units for the Y Axis
3.2 Units—Predrilling in Y axis
V Feed rate reduction
 0: No reduction
 1: At the end of the hole
 2: At the beginning of the hole
 3: At the beginning and end of the hole
AB Spot drilling / through drilling length (distance for feed rate
reduction)
RB Return plane (default: return to the starting position or to
the safety clearance)
Further forms: see page 46

HEIDENHAIN MANUALPLUS 620 Specifications

General

Brand	HEIDENHAIN
Model	MANUALPLUS 620
Category	Control Systems
Language	English