HEIDENHAIN MANUALPLUS 620 - C Axis Off Unit; C Axis On Unit

HEIDENHAIN MANUALplus 620 139
2.11 Units—Special Operations
"C axis ON" unit
The unit activates the SPI (spindle) C axis.
Unitname: C_Axis_ON / Called cycle: None
"C axis OFF" unit
The unit deactivates the SPI (spindle) C axis.
Unit name: C_Axis_OFF / Called cycle: None
“C axis ON” form
SPI Spindle number (0 to 3) for workpiece. Spindle that rotates
the workpiece.
C Approach position
“C axis OFF” form
SPI Spindle number (0 to 3) for workpiece. Spindle that rotates
the workpiece.