HemoCue 201 DM Reference Manual

105
Enter
Cuvette Batch
123ABC
4
FIGURE 4-2
Note that FIGURE 4-2 will not be displayed if
the Cuvette Batch No. requirement is set to
“Not Used” in the Settings (see 3.4.1 General
Settings).
c) Enter Cuvette Batch No. either directly on
the Display via the Text mode and
Numeric mode buttons, or with the
Barcode Scanner via the Barcode Scanner
button.
If Cuvette Batch No. requirement is set to
Entry required (see 3.4.1 General Settings),
and a Cuvette Batch No. that has not
previously been stored in the Analyzer (see
3.2.2 Cuvette Batches) is entered, or the
Cuvette Batch is expired, the following text
will be displayed:
Invalid Cuvette Batch.
If the Previous image button(4) is pressed,
the Main Menu will be displayed (see 2.2.3
Main Menu and Help).
d) If Cuvette Batch No. requirement is set to
Entry required (see 3.4.1 General Settings),
and the Cuvette Batch No. is entered via
the Barcode Scanner using the barcode
from the Cuvette vial, the expiration date
is automatically entered, and FIGURE 4-4
will be displayed. Otherwise FIGURE 4-3
will be displayed.
4 Previous image button

HemoCue 201 DM Specifications

General

Brand	HemoCue
Model	201 DM
Category	Docking Station
Language	English