109
Diluted sample
FIGURE 4-9
Dilution function is only applicable for
HemoCue Glucose 201 DM Analyzer.
The function is not available in all markets.
Note that the Dilution button (6) and the
Help button (7) will only be displayed if the
dilution option has been chosen (see section
3 Settings).
For the Dilution function the sample must be
diluted with NaCl (Saline), one part blood
and one part NaCl.
n) If the sample is diluted, press the Dilution
button (6). FIGURE 4-10 will be displayed.
6 Dilution button
7 Help button
FIGURE 4-10
o) Confirm with Yes or No. FIGURE 4-9 will
then be displayed again.
p) Obtain a blood sample according to the
procedure described in relevant
Instructions for Use.
q) Place the filled Cuvette in the Cuvette
holder and gently insert it into the
measuring position.
r) When the measurement is ready, FIGURE
4-11 will be displayed.
NoNo YesYes
Sample Diluted
with NaCl 1+1?
Please Fill
and
Insert a Cuvette
Patient Test
6
7
To Next Page
Loading...
