72
Patient List setting
A Patient List is a list containing Patient ID’s
and corresponding Patient names. If an OR
supports the sending of Patient Lists to the
Analyzer, the Analyzer can display the name
of a patient after the patient ID has been
entered, allowing for positive patient
identification.
Patient List
Not UsedNot Used
Entry RequiredUsed
2
3
1
FIGURE 3-52
When the Patient List button is pressed in
the General Settings menu (see FIGURE
3-46), the Patient List settings are displayed.
The options available are displayed as
buttons(1). The option currently in use is
indicated by the selected Radio button(2).
Not Used: The Patient List feature is not
used.
Used: The Patient List feature is used when
running a Patient test. See chapter 4 Patient
Test procedure for more information.
a) To change the setting, press the button
for the desired option(1).
b) Press the Confirm button(3) to return to
the General Settings menu, FIGURE 3-46.
1 Options for Patient List
2 Selected option
3 Confirm button
To Next Page
Loading...
Need help?
General
