HIKVISION DS-K1T804B Series User Manual

Figure 7-6 Access Control Parameters
The available parameters descripons are as follows:
Table 7-1 Access Control Parameters
Descripons
Parameter Descripon
Terminal Auth Select the face recognion terminal's authencaon mode. You
can also customize the authencaon mode.
Note
• Only the device with the
ngerprint module supports the
ngerprint related funcon.
• Biometric recognion products are not 100% applicable to
an-spoong environments. If you require a higher security
level, use
mulple authencaon modes.
• If you adopt
mulple authencaon modes, you should
authencate other methods before authencang face.
Sub Reader Auth Select the card reader's authencaon mode.
Door Contact You can select "Remain Open" or "Remain Closed" according to
your actual needs. By default, it is Remain Closed.
Open Duraon Set the door unlocking duraon. If the door is not opened for
the set me, the door will be locked. Available door locked me
range: 1 to 255s.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
27

HIKVISION DS-K1T804B Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804B Series
Category	IP Access Controllers
Language	English