HIKVISION DS-K1T804B Series User Manual

7.9 Data Transfer
You can export the access control parameters (ngerprint and user informaon) and the
aendance data (data aer aendance, card swiping data for instance). You can also import the
access control parameters from the USB ash drive.
Export Data
Move the cursor and select Transfer → Export to enter the Export page.
Figure 7-28 Export Data Page
Plug a USB ash drive in the device USB interface, and select Export ACS Para. or Export
Aendance Data, enter the key, and press OK. The data will be exported to the USB ash drive.
Note
• The supported USB
ash drive format is FAT32.
• The USB ash drive memory should be from 1G to 32G. Make sure the free space of the USB
ash drive should be more than 512 M.
• Remember the key property, and you should use the key to import the data to another device.
Import Data
Move the cursor and select Transfer → Import to enter the Import page. Select Import ACS Para,
enter the key, and press OK. The system will gain access control parameters from the USB ash
drive.
Note
• The supported USB
ash drive format is FAT32.
• The le for imporng should be in the root directory.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
47

HIKVISION DS-K1T804B Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804B Series
Category	IP Access Controllers
Language	English