HIKVISION DS-K1T804B Series User Manual

Chapter 6 Acvaon
You should acvate the device before the rst login. Aer powering on the device, the system will
switch to Device
Acvaon page.
Acvaon via the device, SADP tool and the client soware are supported.
The default values of the device are as follows:
•
The default IP address: 192.0.0.64
• The default port No.: 8000
• The default user name: admin
6.1
Acvate via Device
If the device is not acvated before rst login, the system will enter the Device Acvaon interface
aer powering on.
Steps
1. Create a device password for acvaon.
2. Conrm the password.
Note
Press the up or down key on the keypad to change the input method.
3. Press OK to acvate the device.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can beer protect your product.
What to do next
Aer the device acvaon, you will enter the administrator adding page. Add an administrator
before other operaons.
6.2
Acvate via SADP
SADP is a tool to detect, acvate and modify the IP address of the device over the LAN.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
12

HIKVISION DS-K1T804B Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804B Series
Category	IP Access Controllers
Language	English