HIKVISION DS-K1T804B Series User Manual

7.7 Aendance Status
Set aendance mode and choose aendance status. You can set the aendance status as check in,
check out, break out, break in, overme in, and overme out according to your actual situaon.
7.7.1 Set Auto Aendance
Set the aendance mode as auto, and you can set the aendance status and its available schedule.
The system will auto change the aendance status according to the congured parameters.
Before You Start
Add at least one person, and set the person's
authencaon mode. For details, see Person
Management .
Steps
1. Move the cursor and select System →
A. Status to enter the Aendance Status page.
2. Move the cursor and select Aendance Mode and set the aendance mode as Auto.
Figure 7-14 Auto Mode
Note
Make sure the aendance status is enabled. By default, it is enabled.
3. Press ESC and save the aendance mode.
4. Move the cursor and select Shortcut Key and dene the shortcut key's aendance status and
schedule.
Note
The aendance status will be valid within the congured schedule. For example, if set the Up
key as check in and the Down key as check out, and set the check in's schedule as Monday
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
34

HIKVISION DS-K1T804B Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804B Series
Category	IP Access Controllers
Language	English