HIKVISION DS-K1T804B Series User Manual

4. Move the cursor and select Shortcut Key and
dene the shortcut key's aendance status and
schedule.
Note
The aendance status will be valid within the congured schedule. For example, if set the Up
key as check in and the Down key as check out, and set the check in's schedule as Monday
08:00, and check out's schedule as Monday 17:00, the valid person's authencaon before
17:00 on Monday will be marked as check in. And the valid person's
authencaon aer 17:00
on Monday will be marked as check out.
5. Press ESC and save the sengs.
Result
Enter the inial page, the current aendance mode will be displayed on the page. If you do not
select a status, the authencaon will be marked as the congured aendance status according to
the schedule. If you press the key on the keypad, and select a status to take aendance, the
authencaon will be marked as the selected aendance status.
7.7.4 Disable
Aendance Mode
Disable the aendance mode and the system will not display the aendance status on the inial
page.
Move the cursor and select System → A. Status to enter the Aendance Status page.
Move the cursor and select
Aendance Mode and set the aendance mode as Disable.
Figure 7-17 Disable Aendance Mode
The aendance status funcon is disabled, and you will not view or congure the aendance
status on the inial page.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
37

HIKVISION DS-K1T804B Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804B Series
Category	IP Access Controllers
Language	English