Figure 7-22 Man-Hour Shi Page
2. Select a shi from the list, and press OK .
3. Select Edit to enter the Edit Shi page.
Note
By default, the man-hour shi type includes 6H/Day (6 hours per day), 8H/Day (8 hours per
day), and 30 custom types.
4. Edit shi name, shi duraon (work duraon), the latest on-work me, and the break me.
Note
• The break
me will not be counted into the working hour.
• If the Latest Time (On-Work) is set to 0, the Latest Time funcon will not be enabled.
5. Press ESC and select Yes to save the sengs.
6. Oponal: Select a shi, press OK, and select Reset to reset the shi to default value.
7.8.4 Manage Holiday (Add/Search/Edit/Delete)
Set the aendance holiday. The aendance will not be recorded during the holiday.
Add Holiday
Move the cursor and select Holiday → New to enter the New page. Enter No., name, start date,
and end date. Press OK to save the sengs.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
42