HIKVISION DS-K1T804B Series - Page 56

Steps
1. Move the cursor and select
Shi → Normal to enter the Normal page.
Figure 7-21 Normal Shi Page
2. Select a shi and press OK.
Note
By default, the normal shi type includes 2/Day (2 mes per day), 4/Day (4 mes per day), and
30 custom types.
3. Select Edit and press OK to enter the Edit Shi page.
4. Set the
shi name and period in order.
Note
• The
shi name supports numbers, uppercase leers, lowercase leers, Chinese characters
and symbols.
• Up to 32 characters are allowed in the shi name.
• Up to 4
me periods can be edited.
5. Press ESC, and select Yes to save the sengs.
6. Oponal: Select a normal shi and select Reset and the shi will be reset to default value.
Set Man-Hour
Shi
Set the man-hour shi parameters, including the shi name, the work duraon, the latest on-work
me, and the break me.
Steps
Up to 32 man-hour shis can be congured.
1. Move the cursor and select Shi → Man-Hour to enter the Man-Hour page.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
41