HIKVISION DS-K1T804B Series - Add General Timetable

The xed break duraon will be excluded from work hours.
Must Check
The break duraon will be calculated and excluded from work hours according to
actual check-in and check-out me.
Note
If you select Must Check as calculaon method, you need to set aendance status for
late or early returning from break.
6. Click Save to save the sengs.
7. Oponal: Click Add to connue adding break me.
Congure
Report Display
You can congure display contents displayed in the aendance report, such as the company name,
logo, date format, me format, and mark.
Steps
1. Enter Time & Aendance module.
2. Click
Aendance Stascs → Report Display .
3. Set the display sengs for aendance report.
Company Name
Enter a company name to display the name in the report.
Aendance Status Mark
Enter the mark and select the color. The related elds of aendance status in the report will
display with the mark and color.
Weekend Mark
Enter the mark and select the color. The weekend elds in the report will display with the
mark and color.
4. Click Save.
8.9.2 Add General Timetable
On the metable page, you can add general metable for employees, which requires the xed
start-work me and end-work me. Also, you can set valid check-in/out me, allowable metable
for being late and leaving early.
Steps
1. Click Time and Aendance → Timetable to enter the metable sengs page.
2. Click Add to enter add metable page.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
105