HIKVISION DS-K1T804B Series - Set System Parameters

7.10.3 Set System Parameters
Set the system parameters, including the device me format, the keypad sound, the voice prompt,
the volume, the sleeping mode, the
aendance record prompt the authencaon mode, record
delete funcon, and the language.
Steps
1. Move the cursor and select System → System .
2. Press OK to enter the System page.
Figure 7-31 System Page
3. Edit the parameters.
Time Format
Select an appropriate
me format according to your preference.
Keypad Sound
Enable or disable the keypad sound according to your preference.
Voice Prompt
Enable or disable the voice prompt according to your preference.
Voice Volume
Set the device voice prompt volume.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
50