HIKVISION DS-K1T804B Series - Configure Volume Input or Output; Operate Relay; View Relay Status

9.13 Congure Volume Input or Output
Steps
1. On the Device for Management page, click → Image → Audio Input or Output to enter
Audio Input or Output tab.
2. Move the block to adjust the device input and output volume.
3. Click Save.
9.14 Operate Relay
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click to enter the remote conguraon page.
3. Click Operaon → Relay .
4. Enable or disable the relay.
9.15 View Relay Status
Click Maintenance and Management → Device Management → Device to enter the device list.
Click
to enter the remote conguraon page.
Click Status → Relay and you can view the relay status.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
126