HIKVISION DS-K1T804B Series User Manual

• You can
congure the shi in the Shi Management. For detailed informaon, see Shi
Management .
• By default, the system contains 32 departments.
• Press the up or down key on the keypad to change the input method.
Search Department
Search the target department by entering the department name.
Move the cursor to the Dept., and press OK to enter the department list.
Enter the department name in the search box, and press OK to start search.
Reset Department
Reset all parameters of the target department to the default ones.
Move the cursor to the Dept., and press OK to enter the department list.
Select a department from the list and select Reset, and press OK. All parameters will be reset to
default ones.
7.8.3
Shi Management
The normal shi and the man-hour shi are available to be congured. You can set the aendance
rule and the aendance checking mes in the normal shi. You can also set the working hours per
day in the man-hour shi.
Normal Shi: It is applicable to the normal aendance situaon.
Man-Hour Shi: It is applicable to the situaon with exible working hours.
Set
Aendance Rule for Normal Shi
Move the cursor and select Shi → Normal → Rule , and press OK to enter the Rule page.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
39

HIKVISION DS-K1T804B Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804B Series
Category	IP Access Controllers
Language	English