HIKVISION DS-K1T804B Series - Page 79

Steps
1. Enter Person module.
2. Select an
organizaon in the organizaon list to add the person and click Add to enter Add
Person panel.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the Credenal → Card area, click +.
4. Click
Sengs to enter the Sengs page.
5. Select Local as the card issuing mode.
Figure 8-1 Issue a Card by Local Mode
6. Set other related parameters.
Card Enrollment
Staon
Select the model of the connected card enrollment staon.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
64