ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 99
Hik-Connect is disabled by default.
The verification code is empty when the device leaves factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
Every time you enable Hik-Connect, the Service Terms interface pops up and you should check the
checkbox before enabling it.
(Optional) Check Custom and input the Server Address.
(Optional) Check Enable Stream Encryption. After this feature is enabled, the verification code is required
for remote access and live view.
Use your phone’s scanning tool to quickly get the code by scanning the QR code below.
Hik-Connect Settings Interface
Click Apply to save the settings.
After configuration, you can access and manage the DVR with your mobile phone or the Web site
(www.hik-connect.com).
To Next Page
Loading...
