ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 116
Storage Mode Settings Interface
Select a camera for which you want to configure quota.
Enter the storage capacity in the Max. Record Capacity (GB) text fields.
Copy the quota settings of the current camera to other cameras if desired. Click Copy to enter the Copy
Camera menu, as shown in Figure 10-7.
Copy Settings to Other Camera(s)
Select the camera(s) to be configured with the same quota settings. You can click the IP Camera checkbox
to select all cameras.
Click OK to finish the Copy settings and go back to the Storage Mode interface.
Click Apply to apply the settings.
If the quota capacity is set to 0, then all cameras will use the total capacity of the HDD for recording.
HDD Detection
Purpose:
The device provides HDD detection functions such as S.M.A.R.T. and the Bad Sector Detection technique.
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDDs to detect and
report on various reliability indicators in the hopes of anticipating failures.
To Next Page
Loading...
