ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 44
Purpose:
Certain speed domes can be configured to start a predefined park action (scan, preset, patrol, etc.)
automatically after a period of inactivity (park time).
Click PTZ in the lower-right corner of the PTZ setting interface, or press the PTZ button on the front panel,
or click the PTZ Control icon in the quick setting bar to enter the PTZ setting menu in live view mode.
Click the button to show the one-touch function of the PTZ control.
PTZ Panel - One-touch
There are three one-touch park types selectable. Click the corresponding button to activate the park
action.
• Park (Quick Patrol): The dome starts patrol from predefined preset 1 to preset 32 in order after the
park time. Undefined presets will be skipped.
• Park (Patrol 1): The dome starts move according to predefined patrol 1 path after the park time.
• Park (Preset 1): The dome moves to the predefined preset 1 location after the park time.
The park time can be set only through the speed dome configuration interface. Default value is 5s.
Click the button again to deactivate it.
PTZ Control Panel
To enter the PTZ control panel, there are two ways supported.
OPTION 1
In the PTZ settings interface, click PTZ on the lower-right corner, next to the Back button.
OPTION 2
In Live View mode, press the PTZ Control button on the front panel or on the remote control, or choose
the PTZ Control icon , or select the PTZ option in the right-click menu.
Click Configuration on the control panel to enter the PTZ Settings interface.
To Next Page
Loading...
Need help?
General