ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 21
Using the Setup Wizard for Basic Configuration
The Setup Wizard can guide you to configure the system resolution, system date/time, HDD initialization, IP
camera management, etc.
To cancel the Setup Wizard, click Exit. You can choose to use the Setup Wizard next time by leaving
the “Start wizard when the device starts?” checkbox checked.
Enter the general settings interface to configure the VGA/HDMI resolution, system date and time, and
HDD initialization.
Initialize HDD
Check to initialize a new HDD used for the first time (factory-installed HDDs are already initialized).
Start Wizard Interface
Click Next to enter the IP Camera Management interface.
Automatically Add Cameras
You can quickly add one or more IP cameras that are searched within the same network and have the
same user name and password with the device.
To Next Page
Loading...
Need help?
General