ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 131
Configure the following settings:
• Device Name: Edit the name of the DVR.
• Device No.: Edit the serial number of the DVR. The Device No. can be set in the range of 1 to 255, and
the default no. is 255. The number is used for the remote and keyboard control.
• Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5 Minutes,
then the system will exit from the current operation menu to live view screen after 5 minutes of menu
inactivity.
• Menu Output Mode: You can choose the menu display on different video outputs. By default, only
HDMI
™
/VGA is selectable.
• Click Apply to save the settings.
Managing User Accounts
Purpose:
There is a default account in the DVR: Administrator. The Administrator user name is admin and the password
is set when you start the device for the first time. The Administrator has the permission to add and delete user
and configure user parameters.
Adding a User
Go to Menu > Configuration > User.
User Management Interface
Click Add to enter the Add User interface.
To Next Page
Loading...
Need help?
General