ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 38
Choose the camera for PTZ setting in the Camera drop-down list.
Enter the PTZ camera parameters.
All the parameters should be exactly the same as the PTZ camera parameters.
Click Apply to save the settings.
Setting PTZ Presets, Patrols, and Patterns
Before You Start:
Make sure that the presets, patrols, and patterns are supported by the PTZ protocols.
Customizing Presets
Purpose:
Follow the steps to set the Preset location you want the PTZ camera to point to when an event takes place.
Go to Menu > Camera > PTZ.
PTZ Settings
Use the directional button to wheel the camera to the location where you want to set the preset. Zoom
and focus operations can be recorded in the preset as well.
Enter the preset no. (1 to 255) in the preset text field.
Click Set to link the location to the preset.
Repeat steps 2-3 to save more presets.
Click Clear to clear the location information of the preset, or click Clear All to clear the location
information of all the presets.
To Next Page
Loading...
Need help?
General