ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 114
Chapter 10 HDD Management
Initializing HDDs
Purpose:
A newly installed hard disk drive (HDD) must be initialized before use.
Option 1: Initialize HDD from the Startup Wizard
When the device starts up, the Setup Wizard can guide you to configure basic settings.
In the General settings interface, check Initialize HDD to initialize the HDD when it is used for the first time.
Initialize HDD
Option 2: Initialize HDD from the HDD Management Interface
Go to Menu > HDD > General.
HDD Information Interface