ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 16
Using the Unlock Pattern for Login
Configure the unlock pattern for device login.
Configuring the Unlock Pattern
After the device is activated, configure the device unlock pattern.
Set Unlock Pattern
Use the mouse to draw a pattern among the nine dots on the screen. Release the mouse when done.
Draw the Pattern
Connect at least four dots to draw the pattern.
Each dot can be connected only once.
Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured
successfully.
To Next Page
Loading...
Need help?
General