ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 97
Chapter 9 Network Settings
Configuring General Settings
Purpose:
Network settings must be properly configured before you operate the DVR over a network.
Go to Menu > Configuration > Network > General.
Network Settings
Configure the following settings: Working Mode, NIC Type, IPv4 Address, IPv4 Gateway, MTU, and DNS
Server.
If the DHCP server is available, you can click the DHCP checkbox to automatically obtain an IP address and
other network settings from that server.
The valid value range of MTU is 500 to 9676.
Click Apply.
Configuring Advanced Settings
Configuring Hik-Connect
Purpose
Hik-Connect enables the mobile phone app and the service platform page (www.hik-connect.com) to access
and manage your connected DVR, providing convenient remote access to the surveillance system.
To Next Page
Loading...
Need help?
General