ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 118
Bad Sector Detection
Click Error info to see detailed damage information.
You can also pause/resume or cancel the detection as desired.
Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal.
Go to Menu > Configuration > Exceptions.
Set the Exception Type to HDD Error on the drop-down list.
Click the checkbox(s) to select the HDD error alarm type(s), as shown in Figure 10-10.
The alarm type can be set to: Audible Warning, Notify Surveillance Center, Send Email, and Trigger
Alarm Output. Refer to Chapter 8.8 Setting Alarm Response Actions.
Configure HDD Error Alarm
To Next Page
Loading...
Need help?
General