ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 117
S.M.A.R.T. Settings
Go to Menu > Maintenance > HDD Detect.
Select the HDD to view its S.M.A.R.T. information list, as shown in Figure 10-8.
S.M.A.R.T Settings Interface
The related S.M.A.R.T. information is shown on the interface.
You can choose the self-test types: Short Test, Expanded Test, or Conveyance Test.
Click Start to start the S.M.A.R.T. HDD self-evaluation.
To use the HDD even when S.M.A.R.T. checking has failed, check the Continue to use the disk when
self-evaluation is failed checkbox.
Bad Sector Detection
Click Bad Sector Detection.
Select the HDD no. in the drop-down list you want to configure, and choose All Detection or Key Area
Detection as the detection type.
Click Detect to start the detection.
To Next Page
Loading...
Need help?
General