ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 13
Chapter 2 Getting Started
Device Startup and Activation
Starting Up and Shutting Down the DVR
Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the DVR.
Before You Start:
Check that the voltage of the extra power supply meets the DVR’s requirement, and the ground connection is
working properly.
Starting Up the DVR
Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power indicator LED on
the front panel should be green, indicating the device is on.
The row of icons at the bottom of the screen shows the HDD status. “X” means that the HDD is not
installed or cannot be detected.
Shutting Down the DVR
Go to Menu > Shutdown.
Shutdown Menu
Click Shutdown.
Click Yes.
Shutdown Attention
To Next Page
Loading...
Need help?
General