ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 39
Calling Presets
Purpose:
This feature enables the camera to point to a specified position such as a window when an event takes place.
Click the PTZ button in the lower-right corner of the PTZ setting interface, or press the PTZ button on the
front panel, or click the PTZ Control icon in the quick setting bar, or select the PTZ option in the
right-click menu to show the PTZ control panel.
Choose Camera in the drop-down list.
Click the button to show the general settings of the PTZ control.
PTZ Panel - General
Click to enter the preset no. in the corresponding text field.
Click Call Preset to call it.
Customizing Patrols
Purpose:
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before
moving on to the next key point. The key points correspond to the presets. The presets can be set following
the steps above in Customizing Presets.
Go to Menu > Camera > PTZ.
To Next Page
Loading...
