ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 41
Click the button to show the general settings of the PTZ control.
PTZ Panel - General
Select a patrol in the drop-down list and click Call Patrol to call it.
You can click Stop Patrol to stop calling it.
Customizing Patterns
Purpose:
Patterns can be set by recording the PTZ movement. Call the pattern to make the PTZ move according to the
predefined path.
Go to Menu > Camera > PTZ.
PTZ Settings
Choose pattern number in the drop-down list.
Click Start and click corresponding buttons in the control panel to move the PTZ camera, and click Stop to
stop it. The PTZ movement is recorded as the pattern.
To Next Page
Loading...
